Huawei FusionServer Pro XH321 V5 Скачать руководство пользователя страница 39

Страница: 39 / 186

Safety Instructions

5.1 Safety Instructions
5.2 Maintenance and Warranty

5.1 Safety Instructions

General Instructions

●

Comply with all local laws and regulations when installing the hardware. The

safety instructions in this document are only supplemental to local laws and

regulations.

●

The "DANGER", "WARNING", and "CAUTION" information in this document

does not represent all the safety instructions, but supplements to the safety

instructions.

●

To ensure safety when installing hardware, follow all safety instructions

provided on the device labels and in this document.

●

Only qualified personnel are allowed to perform special tasks, such as

performing high-voltage operations and driving a forklift.

●

Take protective measures if a Class A product is used in residential areas as it

is likely to cause radio interference.

Personal Safety

●

Only personnel certified or authorized by Huawei are allowed to install the

hardware.

●

Stop any operation that may cause personal injury or equipment damage,

report the problem to a project supervisor immediately, and take protective

measures.

●

Do not operate the product or handle cables during thunderstorms.

●

Before carrying devices, note the following points:
–

Do not carry more weight than is permitted by local laws or regulations.

–

Ensue that there are enough people to carry the devices.

●

Wear clean protective gloves, ESD clothing, a protective hat, and protective

shoes, as shown in

Figure 5-1

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

5 Safety Instructions

Issue 17 (2021-03-09)

Содержание FusionServer Pro XH321 V5



























































































































































































Результаты поиска

Содержание FusionServer Pro XH321 V5

Отзывы:

Бренды по названию

Популярные бренды

Huawei FusionServer Pro XH321 V5, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание FusionServer Pro XH321 V5

Отзывы:

Бренды по названию

Популярные бренды