Table 5-5 LOM ports
Chip Model
Port Type
Rate
Negotiation
Mode
Supported
Rate
Rates Not
Supported
X722
10GE optical
port
Auto-
negotiation
10000 Mbit/s
(full duplex)
10000M
10/100/1000
M
GE electrical
port
Auto-
negotiation
1000 Mbit/s
(full duplex)
1000M
10/100M
● Use
Intelligent Computing Compatibility Checker
to obtain information
about the cables and optical modules supported by the LOM ports.
● The LOM ports support NC-SI and PXE.
● The LOM ports do not support forced rates.
● The electrical LOM ports cannot be connected to power over Ethernet (PoE)
devices (such as a switch with PoE enabled). Connecting a LOM port to a PoE
device may cause link communication failure or even damage the NIC.
● The electrical LOM ports do not support SR-IOV.
● Forcibly powering off a server will cause intermittent NC-SI disconnection
and disable the Wake on LAN (WOL) function of the LOM ports. To restore
the NC-SI connection, refresh the iBMC WebUI.
5.3 Processor
●
The server supports two or four processors.
●
If two processors are required, install them in sockets CPU1 and CPU2.
●
The same model of processors must be used in a server.
●
Contact your local Huawei sales representative or use the
Computing Compatibility Checker
to determine the components to be used.
Huawei FusionServer Pro 5885H V5 Server
Technical White Paper
5 Hardware Description
Issue 09 (2020-06-05)
Copyright © Huawei Technologies Co., Ltd.
24
