Figure 8-3 Wearing an ESD wrist strap
●
Exercise caution when using tools that could cause personal injury.
●
If the installation position of the device is above shoulder height, use a
stacker to lift it. This will prevent it from falling.
●
To prevent electric shock, do not touch high-voltage cables directly or
indirectly. A high-voltage power supply may be powering the device.
●
Properly ground a device before powering it on.
●
Do not use a ladder alone. Have someone else hold the ladder steady to
prevent accidents.
●
To avoid damaging your eyes when installing, testing, or replacing optical
cables, do not look into optical ports without eye protection.
Equipment Safety
●
Use the recommended power cables at all times.
●
Always use the power cables delivered with the devices.
●
Wear ESD clothing and gloves before handling a device. This prevents
electrostatic damage.
●
When moving a device, hold the bottom of the device. Do not hold the
handles of the installed modules, such as the PSUs, fan modules, drives, and
the mainboard. Handle the equipment with care.
●
Exercise caution when using tools that could cause personal injury.
●
Connect the primary and secondary power cables to different power
distribution units (PDUs) to ensure reliable system operation.
●
Properly ground a device before powering it on.
Transportation Precautions
Improper transportation may damage equipment. Contact the manufacturer for
precautions before attempting transportation.
Exercise caution when transporting equipment.
●
The logistics company engaged to transport the equipment must be reliable
and comply with international standards for transporting electronics. Ensure
that the equipment being transported is always upright. Take necessary
precautions to prevent collisions, corrosion, package damage, damp
conditions and pollution.
●
Transport the equipment in its original packaging.
Huawei FusionServer Pro 2288X V5 Server
Technical White Paper
8 Safety Instructions
Issue 03 (2020-04-20)
Copyright © Huawei Technologies Co., Ltd.
70
