background image

 

11

 

4.

 

Check your computer. If there is a virtual drive, right-click it and choose 

Open

. Find the 

ETS_setup.exe

 file and double-click it to start the modem driver installation. 

5.

 

If the problem persists, contact your service provider.

 

Warnings and Precautions 

This section contains important information pertaining to the operating instructions of your 
device. It also contains information about how to use the device safely. Read this information 
carefully before using your device. 

Electronic Device 

Power off your device if using the device is prohibited. Do not use the device when using the 
device causes danger or interference with electronic devices. 

Medical Device 

 

Follow rules and regulations set forth by hospitals and health care facilities. Do not use 
your device when using the device is prohibited. 

 

Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained 
between a device and a pacemaker to prevent potential interference with the pacemaker. If 
you are using a pacemaker, use the device on the opposite side of the pacemaker and do 
not carry the device in your front pocket. 

 

Some wireless devices may affect the performance of hearing aids. For any such problems, 
consult your service provider. 

Potentially Explosive Atmosphere 

Power off your device in any area with a potentially explosive atmosphere, and comply with all 
signs and instructions. Areas that may have potentially explosive atmospheres include the 
areas where you would normally be advised to turn off your vehicle engine. Triggering of 
sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even 
deaths. Do not power on your device at refueling points such as service stations. Comply with 
restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and 
chemical plants. In addition, adhere to restrictions in areas where blasting operations are in 
progress. Before using the device, watch out for areas that have potentially explosive 
atmospheres that are often, but not always, clearly marked. Such locations include areas 
below the deck on boats, chemical transfer or storage facilities, and areas where the air 
contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers 
of vehicles using liquefied petroleum gas (such as propane or butane) whether this device 
can be safely used in their vicinity. 

Traffic Security 

 

Do not use your device while driving, and observe the local laws and regulations. 

 

Do not use your device while flying in an aircraft. Power off your device before boarding an 
aircraft. Using wireless devices in an aircraft may cause danger to the operation of the 
aircraft and disrupt the wireless telephone network. It may also be considered illegal.   

Operating Environment 

 

Do not use or charge the device in dusty, damp, and dirty places or places with magnetic 
fields. Otherwise, it may result in a malfunction of the circuit. 

Содержание FT2050

















Отзывы: