
29
Time is not displayed.
1.
Make sure that the antenna is installed properly.
2.
Adjust the antenna direction or move the FWT to a place covered with strong signals.
3.
If the problem persists, contact your service provider to check whether the FWT is in
the signal coverage area.
After the FWT is powered off, sometimes there is no display;
sometimes the power supply icon and blinking battery icon are
displayed.
After the FWT is powered off, it is normal when no display is on the screen The power
supply icon and blinking battery icon indicate that the battery is being charged.
There is a ringtone after the busy tone.
It indicates that there is an incoming call. If you are not in a conversation, you can answer
the call.
After you lift the handset, there is a ringtone when you are to dial or
are dialing a phone number.
It indicates that there is an incoming call. If you are not in a conversation, you can answer
the call.
Only the battery icon is displayed on the screen.
It indicates that the FWT is powered by the battery. If the FWT is powered solely by the
battery and the battery icon is blinking without any bar inside, it indicates that the battery
level is low. Use the power adapter to charge the battery or replace the battery.
Version: V100R001_01 Part Number: 3101****