Huawei ETS2000 Series, Руководство по обслуживанию

Страница: 49 / 50

HUAWEI ETS2000
系列 无线固定台 维修手册 第四章
49
Area Code Setting
NOTE: The keypad commands of area code setting are valid only when code
analyzing is NOT supported. So these two commands are invalid for the
following versions: through B055 to current version.
##53*xxxxx# set an Area Code as xxxxx (5 digits at most)
1
##53*# erase the Area Code
DESCRIPTION: set or erase an Area Code, only valid in RUIM version
UIM Lock Setting*** NOTE: The Function is Supported just when UIM function is Supported;
##54*1*XXXX# Lock the UIM. XXXX is PIN code.
##54*2*XXXX# Unlock the UIM. XXXX is SPC code.
1
##54*3#
Check the status of the UIM; If the UIM has been locked, there is a sound
of beep; if the UIM hasn't been locked, there are three sounds of beep;
if the check procedure has failed, there are two sounds of beep.
DESCRIPTION: When you check the UIM status ,"LOC ” means the UIM is
locked, and "UNLOC" means the UIM is unlocked
prefix setting NOTES: not all setting supported by all version
##55*0# no prefix
##55*1# local area number adding
##55*2# access number adding for dialing-out
##55*3# enable local area number adding and access number adding
1
##55*4# enable long-distance and mobile access number
banlence display setting
##56*0# close intelligent network service charge display
1
##56*1# enable intelligent network service charge display
DESCRIPTION: Enable/Cancel the Balance display
Language Setting
##57*0# Setting language is English.
1
##57*1# Setting language is Chinese.
Auto dial time Setting
1 ##58*n#
Setting time to automatic dial. n = 0~9. 0: close. 1~9 is the time for
dial-out, unit second.
Access code Setting
1 ##59*n# Setting the access code . （ the version before BO5C ）
DESCRIPTION: ##59*x*n# can only be used after B05C
##59*1*n# Setting the access code .
##59*2*n# Setting the long distance fix phone access code . 2
##59*3*n# Setting the long distance mobile phone access code .
DESCRIPTION: Only valid when reset