8
Verify the configuration according to the c
document.
2. Enter the user name and password (d
and click
Log In
to access the web m
3. Click the
Account
tab. Set
Register N
based on the data plan in step . Se
address of the LAN port on the EGW1
4. Click
Submit
to finish IP phone config
You can choose
Voice > Phone Alloc
management system of the EGW1530
phone.
c
Server Type
Planned Item
Remarks
Starting Configuration —— Loca
Solution
a
Planning Server Information
When the EGW1530B functions as the loca
the SIP server on the central node at the he
synchronizes them to the EGW1530B. You
the EGW1530B.
Before configuration, collect user quantity in
allocation to the enterprise IT administrator.
The default outgoing prefix of the EGW1530
according to the called number change rule
Data
synchronization
server
IP address
Contact the e
address of th
Port number
Contact the e
number of the
number fails t
Key for data
synchronization
The EGW153
that of the da
same, the da
the EGW1530
synchronizati
including digi
negotiate with
format.
SIP server
address
The address
Obtain the ad
8
SIP server
SIP server type
The options a
enterprise IT
When the SIP
When the SIP
Heartbeat
detection
interval
Interval for th
the active and
ranges from 3
recommende
Registration
interval
Interval for th
messages for
seconds. The
value
360
is r
chapter
Verifying Configuration
in this
default values:
admin
) of the administrator
anagement page.
Name
to the user number of the IP phone
et
SIP Server
to
192.168.1.1
(default IP
1530B).
guration.
cation > IP Phone
in the web
0B to view the registration status of the IP
l Gateway in a Branch in the UC
l gateway in a branch in the UC solution,
eadquarters allocates all user numbers and
do not need to configure user numbers on
n the branch and apply for number
0B is
888
. The outgoing prefix is deleted
in outgoing calls.
enterprise IT administrator to obtain the IP
e data synchronization server.
enterprise IT administrator to obtain the port
e data synchronization server. If the port
to be obtained, use the default value
8098
.
30B compares its data synchronization key with
ata synchronization server. If the keys are the
ta synchronization server synchronizes data to
0B; otherwise, the EGW1530B rejects the data
on. The key is a string of 1 to 22 characters
ts, letters, or special characters. You can
h the enterprise IT administrator about the key
can be an IP address and or a domain name.
ddress from the enterprise IT administrator.
8
are IMS or NGN. Obtain the type from the
administrator.
P server is eSpace U1960, select NGN.
P server is eSpace U2900, select IMS.
e EGW1530B to send heartbeat messages to
d standby SIP servers, in seconds. The value
30 to 150. The default value
90
is
d.
e registration group to send registration
r users in this group to the SIP server, in
e value ranges from 0 to 14400. The default
recommended.
