2
Preparation for Installation
Notice
1
This document describes how to install the server, how to connect the power cables and signal cables, and
how to check the connections when the Huawei RH2288H V3, and RH5885H V3 server act as the server of
eSight.
The power cable connection and signal cable connection that are detailed in this document are written
according to the standard configuration. If the actual on-site installation requirements are inconsistent with this
document, handle the requirements according to the actual situation. Unless otherwise specified, the models of
the corresponding floating nuts and panel screws are M6.
All figures in this manual are for reference only and may differ from actual devices which prevail.
This document does not describe the installation of the cabinet. For details on the cabinet installation, refer to
the installation guide of the cabinet.
Before installing devices in the cabinet, take appropriate antistatic measures to prevent any electrostatic discharge of the
human body from damaging sensitive components.
Do not install or remove a live power cable. Before installing or removing the power cable, turn off the power switch.
Server Specifications and Installation Requirements
2
• Cabinets are 19-inch-wide and 39.37-inch-deep and comply with International Electrotechnical Commission
(IEC) 297 standards.
• A space of at least 800 mm be reserved in front of and at the back of each cabinet respectively to facilitate
ventilation and maintenance.
The following table lists the basic server specifications. For details about server specifications, see the server
specifications delivered with devices.
The preceding servers can be installed in the following cabinets:
To ensure a low center of gravity and high stability, install servers in the lower part of a cabinet.
Server
Dimensions
(H x W x D) (mm)
Weight (kg)
Input voltage (V)
Rated Power (W)
RH2288H V3
86.1 (2U) x 447 x 708
27
100 V AC to 240 V AC
2 x 460
RH5885H V3
175 (4U) x 447 x 790
62
100 V AC to 240 V AC
2 x 2000
–48 V DC to –60 V DC
2 x 2500
