NOTE
The terminal IDs
A0
and
A1
must be consistent with the corresponding configuration on the
MGC.
(4) Click
OK
. In the dialog box that is displayed, click
OK
. After the device
automatically restarts, the configuration takes effect.
----End
Result
Check whether the telephone functions properly. Connect two common telephones phone 1 and
phone 2 to two TEL ports on the ONT and test the dialing between phone 1 and phone 2. In
normal cases:
l
The caller hears the dialing tone after taking the phone off the hook.
l
When the caller dials the telephone number of the callee, the phone of the callee rings
successfully, and the caller hears the ring back tone.
l
The caller and the callee communicate with each other successfully.
l
After the callee hangs up, the caller hears the busy tone.
3.2.5 Configuring GPON FTTH Voice Service (SIP) on the NMS
This topic describes how to configure the voice service when an ONT is connected to an OLT
through a GPON port.
Example Network
l
The phones connected to different ONTs can communicate with each other.
l
The ONT obtains an IP address in DHCP mode.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration
Issue 04 (2011-01-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-51