6
During lightning storms, stop using the external antenna, and disconnect it from the
CPE.
Two external antennas can be connected to the CPE at a time. If only one antenna is
connected, connect it to the main antenna interface labeled with
. Otherwise, the CPE
may fail to work normally. To connect an external antenna, do as follows:
1.
Power off the CPE.
2.
Connect the external antenna to the CPE.
3.
Put the external antenna in an open space without any obstacle surrounded, to ensure
good reception of network signals.
Logging In to the Web-Based Utility
Take the Windows XP operating system and the Internet Explorer 6.0 as examples.
Ensure that the CPE is connected to the PC. To log in to the Web-based utility, do as follows:
1.
Set the IP address of the PC and ensure that the IP address of the PC is in the same
network segment as that of the CPE.
Notes:
By default, the IP address of the CPE is 192.168.1.1 and the subnet mask is
255.255.255.0.
It is recommended that the IP address and DNS settings be obtained automatically.
2.
Start the Internet Explorer, enter
http://192.168.1.1
in the address bar, and then press
Enter
.
3.
Enter the user name and the password in the login window that is displayed, and then
click
Login
.
Note:
Both the initial user name and password are
user
.
