manualshive.com logo in svg

Huawei ECC800, Руководство пользователя

Поделиться
Скачать
Huawei ECC800 Скачать руководство пользователя страница 402

Context

After a device is replaced, you can synchronize the parameters of the original

device to the new device.

Procedure

Step 1 Log in to the ECC800-Pro app as an administrator.
Step 2 Choose Parameter Sync.
Step 3 Select the source device and target device.

●

Source device: device before replacement

●

Target device: device after replacement

Step 4 Tap Submit.

----End

8.41.7 How Can I Handle App Login Failure?

Context

If the message The IP is already used is displayed when you attempt to log in to

the PAD app, perform the operations in this section to handle the issue.

Procedure

Step 1 If you have obtained the user name and password used in the previous successful

login, perform the following operations:
1. Check that the PAD connects to the ECC800-Pro over WiFi properly.
2. Use the obtained user name and password to log in to the app and exit.
3. Use the user name and password that previously failed the login to log in to

the app again.

Step 2 If you have not obtained the user name and password used in a previous

successful login, perform the following operations:
1. Close the app and wait for about 22 to 23 minutes.
2. Log in as the current user.

----End

ECC800 Data Center Controller

User Manual

8 FAQ

Issue 04 (2021-10-09)

Copyright © Huawei Technologies Co., Ltd.

390

Содержание ECC800


























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды