Note:
z
The microSD card is an optional accessory. If it is not provided in the package, you can
buy one yourself.
z
Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the
SIM/USIM card slot and the microSD card is inserted according to the direction as
labeled on the microSD card slot.
z
Do not remove the microSD or SIM/USIM card when the card is in use. Otherwise, the
card as well as your USB Stick may get damaged and the data stored on the card may
be corrupted.
Installation/Removal Guide
The procedure for installing the management program depends on the operating system
(OS) installed on your PC. The following sections take Windows XP as an example.
Connecting the USB Stick to a PC
Plug the USB Stick into the USB port of your PC.
Installing the USB Stick Management Program
1.
Connect the USB Stick with the PC.
2.
The OS automatically detects and recognizes the new hardware and starts the
installation wizard.
Note:
If the auto-run program does not respond, find the AutoRun.exe file in the driver path.
Then double-click AutoRun.exe to run the program.
3.
Follow the on-screen instructions of the installation wizard.
4.
After the program is installed, a shortcut icon for the management program appears on
the desktop.
CAUTION: This USB modem is approved for use in normal-size laptop computers only. To
comply with FCC RF exposure requirements, this modem should not be used in
configurations that cannot maintain at least 5 mm from users and bystanders. For example,
this modem should not be used in certain laptop and tablet computers and configurations
where the USB connectors are unable to provide or ensure the necessary separation is
available between the modem and its users to satisfy compliance.
Starting the Management Program
After being installed, the management program starts automatically. Then every time the
USB Stick is connected to the PC, the management program starts automatically.
You can also double-click the shortcut icon on the desktop to start the management
program.