Thank you for choosing the Mobile Broadband USB
Stick. With your USB Stick, you can access a wireless
network at high speed.
Note:
This manual describes the appearance of the USB Stick, as well as the procedures for
preparation, installation, and removal. For operation details about the management
program, see the online help included in the management program.
Getting to Know Your USB Stick
The following figure shows the appearance of the USB Stick. It is provided only for your
reference. The actual product may be different.
11
13
1
4
15
2
n
Rotatable USB Connector
It connects the USB Stick to a PC.
o
Indicator
It indicates the status of the USB Stick.
z
Green, blinking twice every 3s: The USB Stick is powered on.
z
Green, blinking once every 3s: The USB Stick is registering with a 2G network.
z
Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network.
z
Green, solid: The USB Stick is connected to a 2G network.
z
Blue, solid: The USB Stick is connected to a 3G network.
z
Cyan, solid: The USB Stick is connected to a 3G+ network.
z
Off: The USB Stick is removed.
p
RF Output Power Port
service port
（
only used for conducted power measurement).
q
SIM/USIM Card Slot
It holds a Subscriber Identity Module (SIM) /Universal Subscriber Identity Module (USIM)
card.
r
MicroSD Card Slot
It holds a microSD card.
Getting Your USB Stick Ready
1.
Slide the back cover to remove it from the USB Stick.
2.
Insert the SIM/USIM card and the microSD card into the corresponding card slots, as
shown in the following figure.
3.
Replace the back cover and slide it into place.
