Figure 3-21
Appearance of the MPU
NOTE
In this document, the equipment exterior is for reference only. The actual equipment may differ from what is
shown in the figures.
Panel
shows the appearance of the panel.
Figure 3-22
Appearance of the panel
1. Ejector lever
2. CLK/Serial
3. CLK/1PPS
4. CLK/TOD
5. AUX
6. Console
7. MGMT-ETH
8. CTL-ETH-SFP
9. LINK/ACT
10. CF OFL button 11. CF card
12. CF indicator
13. USB
14. RESET button 15. ALM indicator
16. OFL button
17. OFL indicator
18. RUN indicator 19. ACT active/standby
indicator
20. MGMT-ETH LINK
indicator
21. MGMT-ETH ACT
indicator
lists the buttons and indicators on the panel of the MPU.
Table 3-15
Buttons and indicators on the panel of the MPU
Indicator/Button
Description
OFL button
To remove a board, you must press and hold the button for six
seconds until the OFL indicator turns on.
This button takes effect only on the slave MPU.
HUAWEI CX600-8/16/X3/X8/X16 Metro Service Platform
Hardware Description
3 CX600-X16
Issue 03 (2013-11-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55