z
When you are charging the battery with the charger, do not touch the plug,
power cord or the charger with a wet hand. Otherwise, electric shock can be
caused.
z
Once the liquid such as water leaks into
14
the charger, remove the plug of the
TS THE GOVERNMENT'S REQUIREMENTS FOR
O RADIO FREQUENCY ELECTROMAGNETIC FIELD.
d by scientific organizations, e.g. ICNIRP (International
ent for the amount of
hen using a mobile phone. The
atory
it
y the government-adopted requirement for safe exposure. The tests
erformed in positions and locations (that is, at the ear and worn on the body)
equired by the FCC for each model. For body worn operation, this phone has
tested and meets FCC RF exposure guidelines when the handset is
tioned a minimum of 15 mm from the body with an accessory that contains
etal part. Use of other accessories may not ensure compliance with FCC RF
re gu
charger from the socket immediately. Otherwise, overheating, fire and other
malfunction may occur.
Certification Information (SAR)
THIS DEVICE MEE
EXPOSURE T
Your mobile phone is a low-power radio transmitter and receiver. When it is
turned on, it emits low levels of radio frequency energy (also known as radio
waves or radio frequency fields).
Governments around the world have adopted comprehensive international safety
guidelines, develope
Commission on Non-Ionizing Radiation Protection) and IEEE (Institute of
Electrical and Electronics Engineers Inc.), through periodic and thorough
evaluation of scientific studies. These guidelines establish permitted levels of
radio wave exposure for the general population. The levels include a safety
margin designed to assure the safety of all persons, regardless of age and health,
and to account for any variations in measurements.
Specific Absorption Rate (SAR) is the unit of measurem
radio frequency energy absorbed by the body w
SAR value is determined at the highest certified power level in labor
conditions, but the actual SAR level of the mobile phone while operating can be
well below the value. This is because the mobile phone is designed to use the
minimum power required to reach the network.
All models of Huawei’s mobile phone are designed to meet radio frequency
exposure guidelines. Before a phone model is available for sale to the public,
must be tested and certified to the FCC that it does not exceed the limit
established b
are p
as r
been
posi
no m
exposu
idelines.
