Board
Applicable
Mode
Transmissi
on Mode
Number of
ports
Port
Capacity
Full/Half-
Duplex
Transmissio
n over FE/
GE optical
ports
1
100 Mbit/s or
1000 Mbit/s
Full- or half-
duplex
UMPTa2/
UMPTa6
LTE
IP over E1/
T1
1
Four
channels
-
Transmissio
n over FE/
GE electrical
ports
1
10 Mbit/s,
100 Mbit/s,
or 1000
Mbit/s
Full-duplex
Transmissio
n over FE/
GE optical
ports
1
100 Mbit/s or
1000 Mbit/s
Full- or half-
duplex
The following table describes the signaling specifications of the UMPTa2, or UMPTa6 working
in LTE mode.
Table 3-8
Signaling specifications
Board
Signaling Specifications (CAPS)
UMPTa2/UMPTa6
120
The following table describes the data radio bearer (DRB) specifications and maximum number
of users supported by the UMPTa2, or UMPTa6 working in LTE mode.
Table 3-9
Data radio bearer specifications
Board
Maximum Number of Users
UMPTa2/UMPTa6
10800
The maximum of data radio bearers (DRBs) supported by the UMPTa2/UMPTa6 working in
LTE mode is three times the maximum number of UEs in RRC_Connected mode.
NOTE
For the signaling specifications of an entire eNodeB or NodeB, see section "Signaling Specifications" in
3900 Series Base Station Technical Description
. For the maximum number of DRBs and UEs in
RRC_Connected mode, see section "Baseband Specifications" in
3900 Series Base Station Technical
Description
.
BTS3900C (Ver.C)
Hardware Description
3 BTS3900C Modules
Issue 03 (2013-05-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
29