FAQs
How do I restore factory settings?
When the router is turned on, press the Reset button for approximately 3 seconds using a pointed object
until the power indicator starts to blink. Restoring factory settings will restore the settings to the default.
You can reconfigure them after the router is restored.
What should I do if I forgot the Wi-Fi password or the login password for the web-
based management page?
Restore the router to its factory settings and then use the default Wi-Fi password and login password to
try again.
What should I do if the network status indicator is red or an Internet connection
cannot be established?
1
Check if the SIM card is inserted. Refer to the Setup section for the right size of SIM card and the right
way to insert it into the slot.
2
If the issue persists, restore the router to factory settings and try again.
3
Contact your carrier to check if your SIM card is out of service. If it's a new card, check if it has been
activated.
What should I do if the Internet speed is slow?
1
Check the signal strength indicator on the router. If it shows weak signal, adjust the router's direction
or move it close to a window to improve signal reception.
2
If your device is connected to the router over Wi-Fi, adjust your device's position to receive better
signal.
3
Restart the router and your device, and try again.
4
Check if you have reached your data traffic limit for the month. If so, your carrier may limit your
Internet speed.
How can I connect to the router using WPS (Wi-Fi Protected Setup)?
To connect a WPS-enabled device to your router using the WPS button:
1
Ensure that Wi-Fi is enabled on the client.
2
Press and hold the WPS button on the router for one second to set up a 2.4 GHz WPS connection.
Why can't I access the router's web-based management page?
1
Ensure that your computer is connected to the router through an Ethernet cable or Wi-Fi.
2
Ensure that your computer is set to obtain an IP address and DNS server address automatically.
3
Restart your browser, or try using another browser.
4
If the problem persists, restore the router to its factory settings.
Why is the content displayed on the web-based management page not up to date?
Depending on your browser's cache, the content for your device on the web-based management page
may not be up to date. Manually clear your browser's cache (for example, open your browser and
choose
Internet Options
>
General
>
Browsing history
>
Delete
.) and re-launch the web-based
management page.
If you are experiencing any other issues with the router:
1
Restart the router.
2
Restore the router to its factory settings.
3
Contact your carrier.
8
华为信息资产
仅供TUV莱茵公司使用
严禁扩散
