TR069 Settings
21
WLAN Bridge
Click
to access the
WLAN Bridge
page.
•
Preamble Type
: It has two options:
Long
and
Short.
In
the case that the client (PC) supports the
Short
type,
the WLAN can have a better performance if it is
Short
.
•
MAX Associations Limit
: It refers to the maximum
number of connections. It is used to set the maximum
number of concurrent WLAN users on the device.
•
Mode
: It refers to the WLAN accessing mode. The
device can work in two modes, as shown in the
following table. The default value is
Access Point
.
•
Bridge Restriction
: It refers to the limitation to the peer
MAC addresses. When it is
Disabled
, the device can
access all the remote bridges; when it is
Enabled
, the
device can only access the remote bridges that the
addresses are in the address list.
•
Bridges
: It refers to the physical address of the remote
peer bridge. The device supports the point-to-multipoint
(PTM) bridge mode.
•
Peer MAC Address
: It refers to the physical address
list of the remote peer bridges.
•
Link Status
:
Up
shows the successful connection and
Down
shows the failed connection.
TR069 Settings
TR069 is the standard that defines the
communication rules for terminal devices and
Automatic Configuration Server (ACS).
If the service provider uses the automatic service
provision function of TR069, then the parameters of
the device are automatically provided by the ACS.
Only when you configure the ACS parameters of the
device and the ACS, the TR069 function can
automatically configure the network parameters. You
do not need to configure other parameters on the
device.
To configure the TR069 function on the device, do as
follows.
Mode
Description
Wireless
Bridge
It is used to connect two or more access
points.
Access
Point
The access points meeting the IEEE
802.11b/g standard or the wireless
terminals can connect the wireless
device.
