6
Installing the Power Adapter
1.
Install the battery based on the battery installation steps.
2.
Connect one end of the power adapter cable to the device and the other to the power socket.
3.
The battery charging icon is displayed on the screen. The battery charging icon becomes static
when the battery is fully charged.
Note:
Remove the battery if the device is left unused for a long period.
If the battery has not been used for a long time or the battery is exhausted, the screen of
the FWT may not function when you charge the battery again. This is normal. After the
battery is being charged for a while, you can power on the FWT for use.
In normal conditions, the FWT depends on the power adapter for power supply and will
use the battery only in the case that the electricity has failed and the power adapter is
unavailable. As the battery can supply power only for a limited period, you must make
sure that the battery has been fully charged before putting it into use.
Installing the Headset (Optional)
The device supports headset jack. For the choice of your headset, consult your service provider.
Call
Making a Call
1.
Enter or edit a number in one of the following ways:
Enter a phone number through the keypad.
