together. The primary antenna transmits and receives 3G/LTE signals, and the secondary
antenna helps improve the quality of received 3G/LTE signals.
a 3G/LTE antenna interface.
Table 3-150
3G/LTE antenna interface attributes
Attribute
Description
Connector type
SMA-K (screw threads outside and a hole inside)
Standards
compliance and
frequency bands
supported
l
FDD LTE: bands 1/3/8
l
TDD LTE: bands 38/39/40/41
l
DC-HSPA+/HSPA+/HSPA/UMTS: bands 1/5/8/9
l
TD-SCDMA: bands 34/39
l
GSM/GPRS/EDGE: 900/1800 (MHz)
Rate
l
Frequency Division Duplexing (FDD) LTE: uplink rate of 50
Mbit/s and downlink rate of 150 Mbit/s
l
Time Division Duplexing (TDD) LTE: uplink rate of 10 Mbit/s
and downlink rate of 112 Mbit/s
l
High Speed Packet Access Plus (HSPA+): uplink rate of 5.76
Mbit/s and downlink rate of 21.6 Mbit/s
l
Dual Carrier High Speed Packet Access Plus (DC-HSPA+):
uplink rate of 5.76 Mbit/s and downlink rate of 42 Mbit/s
l
Time Division-Synchronous Code Division Multiple Access
(TD-SCDMA): uplink rate of 384 kbit/s and downlink rate of 2.8
Mbit/s
l
TD-HSPA: uplink rate of 2.2 Mbit/s and downlink rate of 2.8
Mbit/s
l
General Packet Radio Service (GPRS): uplink rate of 85.6 kbit/s
and downlink rate of 85.6 kbit/s
l
Enhanced Data Rates for GSM Evolution (EDGE): uplink rate of
236.8 kbit/s and downlink rate of 236.8 kbit/s
l
Wideband Code Division Multiple Access circuit switched
(WCDMA CS): uplink rate of 64 kbit/s and downlink rate of 64
kbit/s
l
WCDMA packet switched (PS): uplink rate of 384 kbit/s and
downlink rate of 384 kbit/s
Cable type
l
LTE primary antenna interface:
l
LTE diversity antenna interface:
GPS/BDS Antenna Interface
A GPS/BDS antenna interface can connect to a GPS/BDS+LTE remote diversity antenna to
provide the GPS/BDS positioning function.
antenna interface.
Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
3 Chassis
Issue 10 (2019-03-06)
Copyright © Huawei Technologies Co., Ltd.
246