The MP group interface view is displayed.
4.
Run:
link-protocol ppp
PPP is enabled on the interface.
l
Add an FR interface to a bridge group.
1.
Run:
fr dlci
dlci
A frame relay DLCI is created.
2.
Run:
bridge
bridge-id
The FR interface to the bridge group.
3.
Run:
fr map bridge
dlci-number
broadcast
A mapping between the frame relay DLCI and the bridge group is configured.
l
Add an ATM interface to a bridge group.
1.
Run:
bridge
bridge-id
The ATM interface is added to the bridge group.
2.
Run:
pvc
{ {
pvc-name
[
vpi/vci
] |
vpi/vci
} | {
start-vpi/start-vci
end-vpi/end-
vci
} }
A specified PVC is configured to send and receive bridge packets.
3.
Run:
map bridge broadcast
A mapping between the ATM PVC and the bridge group is configured.
A maximum of 20 interfaces can be added to a bridge group. Different types of interfaces can
be added to the same bridge group. Layer 2 interfaces cannot be added to a bridge group.
To add an MFR interface to a bridge group, ensure that the FR interfaces bound to the MFR
interface have the same bandwidth; otherwise, packet loss may occur.
----End
2.5.5 (Optional) Disabling a Bridge Group from Bridging Specified
Protocol Packets
If a bridge group is disabled from bridging specified protocol packets, the bridge group will
discard the protocol packets.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
bridge
bridge-id
The bridge group view is displayed.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN
2 Transparent Bridging Configuration
Issue 02 (2012-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50
