
AP8130DN
Product Description
2 Hardware Structure
Issue 02 (2014-12-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
1. GE0/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and
supports the PoE power supply.
2. GE1 interface: a 10/100/1000M interface, which connects to the wired Ethernet.
3. SFP: an optical interface.
4. 5 GHz antenna interface.
5. 2.4 GHz or 5 GHz antenna interface.
6. Console interface
7. Default button: restores the factory settings if you remove the screw and hold down the
button more than 3s from the hole.
8. Security slot: Connects to a security lock.
9. Device ground screw: Connects a ground cable to the AP.
10. Ground screw for the surge protective device: Connects the AP to the ground point of an
external surge protective device.
LED Indicators
The AP provides multiple indicators: SYS indicator, Link indicator, and Wireless indicator.
The following table describes indicators on AP.
Indicator colors may vary slightly at different temperature.
Table 2-1
Descriptions about the SYS indicator
Type
Color
Status
Description
Default
status after
power-on
Green
Steady on
The AP is just powered on and the software is not
started yet.
Software
startup
status
Green
Steady on
after
blinking
once
After the system is reset and starts uploading the
software, the indicator blinks green once. Until the
software is uploaded and started, the indicator
remains steady green.