background image

     

Warranty Card

Thank you for choosing HUAWEI Technologies Co., Ltd-a leading telecom solution provider. To get better services, please 
read this warranty card carefully, fill in the required information and preserve this card in good condition.

Preserve well. No reissue

Dealer´s Seal: Limited Warranty

Subject to the exclusions contained below, Huawei Technologies CO., Ltd. (hereinafter referred to as Huawei) warrants its 
access terminals ("Products") to be free from defects in materials and workmanship under normal consumer usage for one 
year from the date of purchase of the product ("Warranty period"). During the warranty period

a Huawei authorized 

service partner shall remedy defects in materials and workmanship free of charge.

Special Notice:

1.  The warranty card shall be applicable only after being stamped by the dealer.
2.  The warranty card must be preserved in good condition and free of any scratch or alteration.
3.  To claim such service for defects that are not included in The following exclusion terms, the warranty card and the
     invoice that records the product serial number shall be presented to a Huawei authorized service  partner. 

Exclusions:

In any of the following cases, the warranty card becomes unenforceable or inapplicable without prior notice:
1.  The defects are caused by improper handling in transportation and assembly.  
2.  The defects are caused by the fact that the product is dismantled or altered by anyone that is not from a Huawei
      authorized service partner.  
3.  The defects are caused by the fact that the product is used in a harsh environment that is not suitable for the operation
      of the product.  
4.  The defects are caused by any force majeure including but not limited to fire, earthquake, lightning and tsunami.
5.  The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the
      applicable User Guide.
6.  The normal wear and tear, including but not limited to the normal wear and tear of the shell and the power module, shall
      not be covered by the limited warranty.
7.  The warranty card is altered or illegible, or the product serial number recorded on the warranty card is inconsistent with
     the actual one imprinted or labeled on the product.
In any case that is not covered by this limited warranty or should the warranty expire

Huawei shall charge for the 

service(s) claimed for the products if the product is still remediable.
Huawei preserves the right for interpretation of this limited warranty.

Your Name

Address/Postal Code

Telephone

Product Type

Product Serial Number

Purchase Date

Invoice Number

Dealer Name

Dealer´s Address/Telephone

Huawei Industrial Base, Bantian, Longgang,
Shenzhen 518129, People's Republic of China

http://www.huawei.com

Huawei Technologies Co., Ltd.

15

Содержание AP6010DN


















Отзывы: