User Manual
Aolynk VDR824 ADSL2+ VoIP Broadband Router/
Aolynk VDR824g ADSL2+ VoIP Wireless Broadband Router
4 Web-based Basic Configuration
15
E
When there are multiple PPPoE servers in the network, you can specify the PPPo
server identifier through which the PPPoE client accesses in the [PPPoE Access
concentrator] text box.
Click <Apply> after the configuration is complete.
II. DHCP
Figure 4-2
Quick Setup – No Login/DHCP
ally, select the
and type in the VPI
If you can obtain IP addresses from your ISP’s DHCP server automatic
No Login/DHCP
option on the [Quick Start] page (see Figure 4-1)
and VCI values specified by your ISP on the page (see Figure 4-2).
Click <Apply> after the configuration is complete.
Caution:
Do not set the same VPI and VCI values for DHCP and PPPoE login types.
AN Setup
4.2 W
Click [WAN Setup] in the navigation bar to enter the corresponding page
which three
Relay, and DDNS. Click the desired tab to enter its
configuration page.
4.2.1 WAN
set WAN connections in detail, or to modify the service
on
tabs are available: WAN, DNS
This page allows you to
attributes. You can access the Internet normally only when these attributes are set
correctly.
