5
Install the dual-female conversion adapter on
the Protect interface of the lightning protection
component.
Install the lightning protection component.
Secure the nut on the Surge interface of the
lightning protection component.
Connect one end of the coaxial cable to the
Protect interface of the lightning protection
component, and use a wrench to secure the
joint.
Implement 1+3+3 waterproof protection for
the coaxial-cable-and-lightning-protection-
component joint. Use one cable tie on each
end of the tape to secure the adhesive tape.
Install the lightning protection component on the
ground bar on the right of the device and use
screws to secure it.
2
Scenario II: Separated Installation Scenario
Use a lightning-proof ground cable to
connect the GND interface of the lightning
protection component and the ground bar.
Wrap one layer
of insulation
tape.
Wrap three layers
of waterproof
tapes.
Wrap three layers
of insulation
tapes.
Use one
cable tie on
each end.
For requirements on the GPS installation, see
GPS Satellite Antenna System Quick Installation Guide
.
For requirements on the GPS antenna position, see
Appendixes
2.
This document describes how to connect the ATN ATOM GPS to the GPS.
NOTE
Dual-female
conversion
adapter
lightning
protection
component
Protect
Surge
Connect the
GND interface
of the lightning
protection
component to
the ground bar.
Use OT M8 terminals as the lightning
protection component terminals.
NOTE
