Huawei 9000 VCT V100R011 Скачать руководство пользователя страница 39

Страница: 39 / 204

Parameter

Description

Bold

This specifies whether the site name is displayed in bold.

Display time and
zone

This specifies whether to display the time and zone of the local site on
the home screen.

Horizontal offset

This fine-tunes the site name's location leftward and rightward on the
GUI controlled by the remote control.

Vertical offset

This fine-tunes the site name's location upwards and downwards on the
GUI controlled by the remote control.

The parameter settings take effect once the settings are saved.

2.5 Configuring an IP LAN Network

The IP LAN parameters of the terminal must be set so that the terminal can communicate with
other network devices.

2.5.1 Status Indicators of the LAN Interface

The status indicators on the LAN interface can quickly provide information about the current
network connection.

There are two indicators working together to indicate the network connection, as shown in

Table

2-3

Table 2-3

Status indicators of the LAN interface

Indicator Status

Connection Status

The orange indicator is off.

The LAN interface is in 10 M network interface mode.

The orange indicator is on.

The LAN interface is in 100 M network interface mode.

The green indicator blinks.

Data is being transmitted. The green indicator turns off
each time a frame of data has been transmitted.

The green indicator is off.

No data is being transmitted or the network is not
reachable.

2.5.2 Setting IP Parameters

The IP parameters of the terminal must be set to allow video communications over an IP LAN
network.

HUAWEI 9000 HD Video Terminal
Administrator Guide

2 Network

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Содержание 9000 VCT V100R011













































































































































































































Результаты поиска

Содержание 9000 VCT V100R011

Отзывы:

Huawei 9000 VCT V100R011, Руководство администратора, Страница: 39 / 204

Результаты поиска

Содержание 9000 VCT V100R011

Отзывы: