Huawei 9000 VCT V100R011 Скачать руководство пользователя страница 142 | Manualshive

Страница: 142 / 204

Huawei 9000 VCT V100R011 Скачать руководство пользователя страница 142

Step 2

Save the settings.

----End

8.2 Creating a Caption

You can create and preview a caption.

Procedure

Step 1

From the home screen, select

Utilities

to display the

Utilities

screen.

Step 2

The options displayed on the

Utilities

screen may vary with software versions. Do the following

to create a caption:

l

If

Middle Caption

and

Banner

are displayed, choose

Banner

>

New

, and then edit the

banner.

l

If only

Caption

is displayed, choose

Caption

and then

New

. Set the parameters listed in

, and then edit the caption.

Table 8-3

Caption parameters

Parameter

Description

Caption
name

This specifies the name of the caption. Each caption can contain text on
the top, in the middle, and at the bottom of the screen.

Visible

This specifies whether the caption is to be displayed at the current
position. For example, if you select this option in

Bottom

, the bottom

caption is displayed.

Height

The height of a top caption ranges from 5% to 30% of the screen height.
The height of a bottom caption ranges from 5% to 20% of the screen
height. The step for adjustment is 5%. The height of a middle caption
cannot be adjusted. The system automatically adjusts the height of a
middle caption based on the remaining space of the screen apart from
the top and bottom captions.

Effect

The captions at different positions can have different special effects.

l

Top caption: The top caption can contain multiple lines of text. In
restricted areas, the text can be aligned left, middle, or right. The top
caption cannot roll.

l

Middle caption: The middle caption can contain multiple lines of
text. The height of each line is the maximum font height on this line.
In restricted areas, the text can be aligned left, middle, or right. The
middle caption can roll upwards in display.

l

Bottom caption: The caption can contain only one line of text. In
restricted areas, the text can be aligned left, middle, or right. The
bottom caption can roll leftwards in display.

Transparenc
y

This specifies the background effect of the caption. The available
options are translucent, solid, and transparent.

HUAWEI 9000 HD Video Terminal
Administrator Guide

8 Captions

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

130

«
...
140
141
142
143
144
...
»

Содержание 9000 VCT V100R011













































































































































































































Отзывы:

Нет отзывов