Huawei 9000 VCT V100R011 Скачать руководство пользователя страница 129

Страница: 129 / 204

Video and Audio

About This Chapter

During the conference, you can control the video and audio of the sites present at the conference.

7.1 Adjusting the Display Effects of the Video

You can adjust the display effects of video by adjusting local video effects (such as the brightness
and the saturation), the picture offset, the sampling phase, and by setting the HUAWEI VPC500/
VPC520 (VPC500/VPC520 for short) parameters.

7.2 Adjusting Audio Effects

You can adjust the audio effects, such as the audio input, sound effect, volume, and stereo.

7.3 Adjusting the Volume at the Local Site

You can adjust the output volume of the local speaker by pressing

on the remote

control.

7.4 Enjoying Stereo Audio

In dual-audio-channel mode, stereo effect audio can be enjoyed allowing users to accurately
locate the direction from which the sound comes, thus gaining a true-to-life experience. The
input sources for the left and right audio channels can be set.

7.5 Switching Between Audio-only and Video Calls

To switch a call between audio-only and video modes, select

from the option bar.

7.6 Adjusting the Screen Layout

The screen layout can be adjusted using two methods. Press

on the remote control to switch

between layouts. Alternatively, select

Layout

from the option bar to display a screen from which

a desired layout can be selected.

7.7 Selecting a Video Source

You can set video input interfaces for the local video, local presentation, and remote video.

7.8 Hiding the Local Video

During a conference, you can hide the local video to prevent the video from being seen by remote
sites. After the local video is hidden, the local site is displayed as a blue screen at remote sites
(analogous to muting the local audio).

HUAWEI 9000 HD Video Terminal
Administrator Guide

7 Video and Audio

Issue 09 (2012-09-03)

Huawei Proprietary and Confidential

117

Содержание 9000 VCT V100R011













































































































































































































Результаты поиска

Содержание 9000 VCT V100R011

Отзывы:

Huawei 9000 VCT V100R011, Руководство администратора, Страница: 129 / 204

Результаты поиска

Содержание 9000 VCT V100R011

Отзывы: