Wireless H3G-TA Engineering Manual A8
WWW.HUASUCN.COM TEL:0571-87967915 18
Figure 3-5-3
The default address for TC module is 1, which can be changed with the CM module
or the address module like the way the TA module does. The address assigned to TC
module is 241 by “Easy Setup”, so the TC module’s address should be changed to
that address before connecting to CM module.
3.7
CM Module Installation And Wiring
CM module can be mounted in a rack or on the battery rack as below:
Figure 3-6-1 Figure 3-6-2
The CM module combine with wireless converter to communicate with TA, and
connecting TC modules via the ports COM1A, COM2A, COM3A and COM4A.
Normally, connect one wireless converter with one battery string, then come to CM
module’s COM1A and make a cycle like the drawing below. Also need a power supply
from COM1B’s pin 3 and pin 4 for the TC module on VIN.
Connect the CM module on the port AC/DC IN to a power supply, the voltage range of
which is required from
85V
～
264VAC or 110V
～
370VDC.
Battery Rack
19 Cabinet
