background image

DO NOT exceed the maximum weight indicated. This 

mounting system is intended for use only with the 

maximum weights indicated. Use with products heavier 

than the maximum weights indicated may result in failure 

of the mount and its accessories, causing possible injury.

WARNING:

Weight Restrictions

If your 

monitor

 weighs more, this mount is NOT compatible.

Check the VESA Pattern of Monitor Before the Installation

MAX: 100mm/4in.

MAX: 100mm/4in.

100 mm ≈ 4 in.

75 mm ≈ 2 7/8 in.

4.4-19.8 lbs

(2-9 kg) 

Your monitor (including 
accessories) CANNOT 

EXCEED 4.4-19.8lbs 
(2-9 kg)

1

 IMPORTANT SAFETY INFORMATION

組み立てる前に、すべての部品が揃っており、破損してないことを確認してください。足りない部品又は破損して
いる部品のある場合は、当社に連絡して下さい。お問い合わせ先:[email protected]
モニターアームを取り付けるデスクは、モニターとモニターの総重量の3 倍の重量を、保持する強度が必要です。
当製品をパーチクルボードに使用しないでください。
当製品内部が高圧ガススプリングが含まれているため、火気•暖房器具•熱具に近づけないでください。
本製品を叩いたり、踏んだり、蹴ったりしないでください。
本製品を分解、改造しないでください。
不用品回収をプロに依頼してください。

Do not install or assemble if the product or hardware is damaged or missing, if you require replacement 
parts, please contact customer service at [email protected]

.

For safe installation, the desk you are mounting to must support minimum 3 times the weight of the total 
load (the mount, the monitor and all accessories weight). Don't use the product on particle board
This product contains a high pressure gas spring, fire and percussion prohibited. Also it is strictly 
prohibited to dismantle without professionals. Please return to the manufacturer or hand over to 
professional agencies if the product is abandoned.

Содержание HNDS8













Отзывы: