BT Downloader
User Guide
Quick Installation Guide
Following is a quick installation guide to get you up and running. For further details to each
of the settings, please refer to Chapter 2 and later.
1. Connect the Ethernet cable from your network router or switch to the BT Downloader.
2. Prepare at least one USB drive with more than 10GB of capacity and connect it to
USB port A on the BT Downloader.
3. When everything is connected, turn both the USB drive and the BT Downloader on.
4. During boot up, the LAN and system LED will go ON, confirmed by a short beep
sound.
5. Once the USB LED is ON, access the web configuration interface via your web
browser. See “How to login” in Chapter 2.
6. Go to Harddisk Utility in the Tools menu, select your drive and format it using the
XFS file system.
7. Go to Users and add a new user.
8. You are now ready to start sharing or downloading files.
Note: Following the steps above is only the beginning but without setting up a USB drive
first, most of the functions will not be available.
Page 3 / Chapter 1 - Introduction
