10
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating
plate are identical to the mains data.
Warning!
The maximum permissible system
impedance is
0.340
Ω
at the interface point of
the user
’
s supply. The manufactory should
declare it in the equipment instruction manual
and instruct the user to determine in
consultation with the supply authority, if
necessary, that the equipment is connected
only to a supply of that impedance or less.
Warning!
Always pull the power plug before making
adjustments to the equipment.
•
Unpack the bench-type circular saw and
check it for damage which may have occurred
in transit.
•
The machine has to be set up where it can
stand firmly, e.g. on a work bench, or it must be
bolted to a strong base.
•
All covers and safety devices have to be
pro-perly fitted before the machine is switched
on.
•
It must be possible for the saw blade to run
freely.
•
When working with wood that has been
pro-cessed before, watch out for foreign bodies
such as nails or screws etc.
•
Before you actuate the On/Off switch, make
sure that the saw blade is correctly fitted and
that the machine
’
s moving parts run smoothly.
6. ASSEMBLY& ADJUSTMENTS
Assembly of folding stand
(Fig.1 & Fig.2)
1. Mount join pipe(D) on wheel bracket(C) with
screws and nylon hex nuts.
2. Mount two handle(A) to U-shaped bracket
(B)using carriage bolts, plastic spacers and
nylon hex. nuts.
3. Mount foot bracket (E) to handle(A) using
carriage bolts, plastic spacers and nylon hex.
nuts.
4. Mount wheel bracket (C) to foot bracket (E)
Fig.1
Fig. 2
and U-shaped bracket (B) using carriage bolts,
plastic spacersand nylon hex. nuts.
5. Remove the wheel cap and remove
mounting hardware inside wheel. Mount the
wheels to wheel bracket using large washers
and nylon hex. nuts. Install wheel caps once