HTW P27 HTW-PB-035P27, Руководство пользователя

Страница: 78 / 176

C
Note: Under Auto mode, both the Auto mode and the actual operation mode indicator
lights illuminate for some models.
Fan operation
- Press the “MODE” button until the”Fan “ indicator light comes on.
- Press the “FAN SPEED” button to choose the fan speed. The temperature can not be adjusted.
- Do not put the duct to window.
Timer operation
- When the unit is on, press the TIMER button will initiate the Auto-off stop program, the Timer off
indicator light illuminates. Press the up or down button to select the desired time. Press the Timer
button again within 5 seconds, the Auto-on start program is initiated. And the Timer on indicator
light illuminates. Press the up or down button to select the desired Auto-on start time.
- When the unit is off, press the Timer button to initiate the Auto-on start program, press it again
within 5 seconds will initiate the Auto-off stop program.
- Press or hold the Up or Down button to change the Auto time by 0.5 hour increments, up to
10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining
until start.
- The system will automatically revert back to display the previous temperature setting if there is no
operation in a 5 seconds period.
- Turning the unit On or Off at any time or adjusting the timer setting to 0.0 will cancel the Auto
Start/Stop timer program.
Sleep (Eco) operation
-Press this button, the selected temperature will increase (cooling) or decrease(heating) by 1°C
30 minutes. The temperature will then increase (cooling) or decrease (heating) by another 1°C after
an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to
the originally selected temperature. This ends the Sleep mode and the unit will continue to operate as
originally programmed.
C
Note: This feature is unavailabe under Fan or Dry mode.
5 Operation
76