Wired Controler
+7:
XK60
17
adjust the lower limit, after that, press the Enter/Cancel button to activate this function.
Energy Saving Setting for Heating
When the unit runs under the HEAT mode, press the Function button to select the
“SAVE” function option, with “SAVING” flashing, then press the Mode button to switch to
the “SAVE” setting for the HEAT mode and then press
▲
or
▼
to adjust the upper limit,
after that, press the Enter/Cancel button to activate this function.
The activated SAVE function can be deactivated by firstly pressing the “Function”
button to select the “SAVE” option and then pressing the “Enter/Cancel” button.
The energy saving setting is as shown in the Fig.20:
Fig.20 SAVE Function Setting
Notes:
ķ
.
Under the Auto mode, when the “SAVE” function is activated, the unit will
forciblyquit the Auto mode and change to the current operation mode. Further,
the “Sleep” function will be deactivated when the “SAVE” function is activated.
ĸ
.
During the “SAVE” setting, if the Function button is pressed down or there is
not any operation within 5s after the last button operation, the system will quit
the “SAVE” setting with the current setting data not saved.
Ĺ
.
The “SAVE” function setting will be memorized in c
ase of power failure.
ĺ
. The lower limit for cooling is 16 °C and the upper limit for heating is 30°C.
