HTW HTW-EST800VER, Руководство пользователя

Страница: 9 / 24

• Do not touch the appliance with wet hands or feet.
• Do not expose the appliance to rain, sunshine, etc.
• Do not move the appliance and do not pull out the plug when the
power cable is found.
• After switching the appliance on and off, the appliance may emit a
noise (tripping) due to heating or cooling. This is a normal action
and does not indicate a malfunction.
INSTALLATION
• Before use, check that the appliance and the cable are not damaged. In case of doubt,
contact an electrician.
• Place the device away from heat sources, flammable materials (curtains, clothes, etc.),
flammable gases or explosive materials and heat-sensitive and deformable materials at
high temperatures. Leave about one metre of free space in front of the appliance and
about 0.5 m on the sides. Do not use the appliance near bathtubs, washbasins or showers
to avoid the danger of electric shock. Avoid positions where it can be pushed or damaged.
• Place the appliance on a horizontal and flat surface, do not use inclined surfaces (the
appliance could tip over). Make sure that the safety system touches the floor. Otherwise
the appliance will not work.
• Make sure that the cable is positioned correctly and that it does not touch the hot
surfaces of the appliance. Do not wind the cable around the appliance and do not bend it.
• To avoid the risk of fire, do not use the appliance with a timer or programmer or with an
automatic on/off system.
In any case, any repairs must be carried out by a qualified electrician.
USE
• Switch on the appliance and press one switch to position "1" for low power heating at
400W and press the other switch to position "2" for high power heating at 800W.
• To switch off the appliance, press the 2 switches to position "0" and disconnect the plug.
7