Mu
r
Capteur
d
’
eau
Chevi
lle
Vis de
fixation
DANGER!
When opening the device, live electrical components are
accessible. Make sure that you pull the mains plug out of the socket
before opening the device.
–
Avoid direct water contact (spray or rain), dust and direct sunlight with the
main unit.
–
Electrical components do not belong into the hands of children.
–
All persons using, handling, installing, servicing, and maintaining this device
must be trained and qualified for handling and repairing this device and follow
this user guide!
–
When used in commercial facilities, the safety regulations of the professional
trade association for electrical installations and equipment must be followed.
–
The use in schools, training centres, hobby-self-help workshops and the
operation of components is to be supervised by trained personnel.
–
Only original spare parts may be used, if the device is in need of repair. The
use of other components can be hazardous and can cause damage.
SENSOR ASSEMBLY
Mount the water level sensors at the points that you want to monitor. The
sensor responds to water contact at the two metal contacts. The sensor circuit
is then closed. The mounting height of the sensor defines the response point
when the functions of the main unit are activated. The sensor cable can be
extended up to 20 m with a double wire.
WATER SENSOR
(included)
Water Level Switch WPS 1000 |
15
ASSEMBLY
(Fixing screw and
dowel not included)
Fixing
screw
Sensor Dowel
holder
Water
sensor
Wal
l
