HTP MicroCut 45 DV, Руководство оператора

Страница: 9 / 23

4
3. Installation
3.1 Unpacking
1. Use the packing lists to identify and account for each item.
2. Inspect each item for possible shipping damage. If damage is evident, contact HTP
before proceeding with the installation.
3.2 Input Power Connections
Note: Check your power source for correct voltage before plugging in or connecting
the unit.
3.3 Air Connections
A. Connecting Air Supply to Unit
Connect the air line to the inlet port of the air filter on the rear panel.
B. Check Air Quality
To test the quality of air, press on the function button briefly and hold the torch head
near a paper towel or clean surface. Check if there is any oil or moisture residue on the
clean surface when the air is coming out of the torch.