manualshive.com logo in svg

HTP EP-220 VWH, Установка, Запуск, Обслуживание, Запчасти, Гарантия

HTP EP-220 VWH - это надежное оборудование для горячего водоснабжения. Инструкция по установке, запуску, обслуживанию и замене деталей включена. Бесплатное скачивание руководства с гарантией доступно на сайте manualshive.com. Обеспечьте правильную работу вашего оборудования с нашим удобным руководством.

Поделиться
Скачать
background image

LP-551 Rev. 3.9.16

46

FAULT   HISTORY                 4       
08/28/2009                Fr 5:19A

This  screen  displays  the  fourth 
oldest  boiler  control  lockout  fault. 
The  top  line  will  alternate  between 
the  words  ‘FAULT  HISTORY’  and 
the  actual  fault  encountered.  The 
bottom line will display the date and 
time that the fault occurred.

Press v once.

FAULT   HISTORY                 5       
08/28/2009                Fr 5:19A

This screen displays the fifth oldest 
boiler control lockout fault. The top 
line will alternate between the words 
‘FAULT  HISTORY’  and  the  actual 
fault  encountered. The  bottom  line 
will  display  the  date  and  time  that 
the fault occurred.

Press v once.

FAULT   HISTORY                 6       
08/28/2009                Fr 5:19A

This screen displays the sixth oldest 
boiler control lockout fault. The top 
line will alternate between the words 
‘FAULT  HISTORY’  and  the  actual 
fault  encountered. The  bottom  line 
will  display  the  date  and  time  that 
the fault occurred.

Press v once.

FAULT   HISTORY                 7       
08/28/2009                Fr 5:19A

This  screen  displays  the  seventh 
oldest  boiler  control  lockout  fault. 
The  top  line  will  alternate  between 
the  words  ‘FAULT  HISTORY’  and 
the  actual  fault  encountered.  The 
bottom line will display the date and 
time that the fault occurred.

Press v once.

FAULT   HISTORY                 8       
08/28/2009                Fr 5:19A

This  screen  displays  the  eighth 
oldest  boiler  control  lockout  fault. 
The  top  line  will  alternate  between 
the  words  ‘FAULT  HISTORY’  and 
the  actual  fault  encountered.  The 
bottom line will display the date and 
time that the fault occurred.

Press v once.

FAULT   HISTORY                 9       
08/28/2009                Fr 5:19A

This screen displays the ninth oldest 
boiler control lockout fault. The top 
line will alternate between the words 
‘FAULT  HISTORY’  and  the  actual 
fault  encountered. The  bottom  line 
will  display  the  date  and  time  that 
the fault occurred.

FAULT   HISTORY                       10
08/28/2009                Fr 5:19A

This screen displays the tenth oldest 
boiler control lockout fault. The top 
line will alternate between the words 
‘FAULT  HISTORY’  and  the  actual 
fault  encountered. The  bottom  line 
will  display  the  date  and  time  that 
the fault occurred.

Table 26 - Boiler Fault Screens

Screen

Description

BLOCKING   HISTORY            1       
08/28/2009                Fr 5:19A

This screen displays the most recent 
boiler  control  blocking  error.  The 
top  line  will  alternate  between  the 
words  ‘BLOCKING  HISTORY’  and 
the blocking code encountered.

Press v once.

BLOCKING   HISTORY           2       
08/28/2009                Fr 5:19A

This  screen  displays  the  second 
oldest  boiler  control  blocking  error. 
The  top  line  will  alternate  between 
the  words  ‘BLOCKING  HISTORY’ 
and  the  actual  blocking  code 
encountered.

Press v once.

BLOCKING   HISTORY           3       
08/28/2009                Fr 5:19A

This screen displays the third oldest 
boiler control blocking error. The top 
line will alternate between the words 
‘BLOCKING  HISTORY’  and  the 
actual blocking code encountered.

Press v once.

BLOCKING   HISTORY           4       
08/28/2009                Fr 5:19A

This  screen  displays  the  fourth 
oldest  boiler  control  blocking  error. 
The  top  line  will  alternate  between 
the  words  ‘BLOCKING  HISTORY’ 
and  the  actual  blocking  code 
encountered.

Press v once.

BLOCKING   HISTORY           5       
08/28/2009                Fr 5:19A

This screen displays the fifth oldest 
boiler control blocking error. The top 
line will alternate between the words 
‘BLOCKING  HISTORY’  and  the 
actual blocking code encountered.

Press v once.

BLOCKING   HISTORY           6       
08/28/2009                Fr 5:19A

This screen displays the sixth oldest 
boiler control blocking error. The top 
line will alternate between the words 
‘BLOCKING  HISTORY’  and  the 
actual blocking code encountered.

Press v once.

BLOCKING   HISTORY           7       
08/28/2009                Fr 5:19A

This  screen  displays  the  seventh 
oldest  boiler  control  blocking  error. 
The  top  line  will  alternate  between 
the  words  ‘BLOCKING  HISTORY’ 
and  the  actual  blocking  code 
encountered.

Press v once.

BLOCKING   HISTORY           8       
08/28/2009                Fr 5:19A

This  screen  displays  the  eighth 
oldest  boiler  control  blocking  error. 
The  top  line  will  alternate  between 
the  words  ‘BLOCKING  HISTORY’ 
and  the  actual  blocking  code 
encountered.

Press v once.

BLOCKING   HISTORY           9       
08/28/2009                Fr 5:19A

This screen displays the ninth oldest 
boiler control blocking error. The top 
line will alternate between the words 
‘BLOCKING  HISTORY’  and  the 
actual blocking code encountered. 

Содержание EP-220 VWH





































































Отзывы:

Нет отзывов

Похожие инструкции для EP-220 VWH

YAMADA Global Series Maintenance Manual preview
Global Series
Бренд: YAMADA Страницы: 18
DAB FEKA VS Instructions For Installation, Maintenance And Use preview
FEKA VS
Бренд: DAB Страницы: 12
A.O. Smith ProMax GCV-30 Specification Sheet preview
ProMax GCV-30
Бренд: A.O. Smith Страницы: 2
A.O. Smith Residential Gas Water Heaters Instruction Manual preview
Residential Gas Water Heaters
Бренд: A.O. Smith Страницы: 84
MCS Master BLP 17M DC User And Maintenance Book preview
BLP 17M DC
Бренд: MCS Master Страницы: 203
Pentair PSC-119-35-02 Installation And Operation Manual preview
PSC-119-35-02
Бренд: Pentair Страницы: 36
Plein Air TV-SP 2000 Instruction Manual preview
TV-SP 2000
Бренд: Plein Air Страницы: 12
Raider RD-EFH02 User Manual preview
RD-EFH02
Бренд: Raider Страницы: 54
HeatStar HSRR30SP(LP) Operating Instructions And Owner'S Manual preview
HSRR30SP(LP)
Бренд: HeatStar Страницы: 32
Rinnai ES38 RHFE-1004FTA Conversion Manual preview
ES38 RHFE-1004FTA
Бренд: Rinnai Страницы: 12
A.O. Smith FREZYA 200S User Manual preview
FREZYA 200S
Бренд: A.O. Smith Страницы: 48
Beliani OS1500 Instruction Manual preview
OS1500
Бренд: Beliani Страницы: 7
Rinnai SENTO 350 Installation, Maintenance And Care preview
SENTO 350
Бренд: Rinnai Страницы: 2
Orbegozo RRW 1200 Instruction Manual preview
RRW 1200
Бренд: Orbegozo Страницы: 85
Clarke Devil 1250 Operating & Maintenance Manual preview
Devil 1250
Бренд: Clarke Страницы: 23
Graco 16X423 Repair Manual preview
16X423
Бренд: Graco Страницы: 20
Flo Fab 8FFSEHA Series Installation, Operation & Maintenance Manual preview
8FFSEHA Series
Бренд: Flo Fab Страницы: 9
Wacker Neuson PS2A 800 Operator'S Manual preview
PS2A 800
Бренд: Wacker Neuson Страницы: 58

Бренды по названию

Популярные бренды

Загрузить еще бренды