１
１３ ｗｗｗ．ｘｉｎｔｅｓｔ．ｃｏｍ．ｃｎ
ｗｗｗ．ｈｙｔｅｃｈｃｎ．ｃｏｍ．ｃｎ １４
3. Method
Ⅰ
for recording and receiving data
Ensure to click “set param” before making record. After the
setting interface pops out, please set correct parameters as
appropriate. You may refer to “carbon dioxide grading guidance”
for setting. The measurement mode is “Immediately”. Then
click “OK” after completion. If it is not necessary to change
the parameters, click “OK” directly.
We see that “REC” on the display screen flashes (the flashing
frequency is the same as record interval), indicating that
measurement of the instrument is carried out with record
synchronously. The data obtained through record can only
be checked only it is received. Click “Data Download” and the
following window pops out.
Save the received data as shown in the figure:
