background image

Initial operation

 

Product boot/shutdown

Press and hold the “          ” button for more than 3 seconds to turn 
the Thermal Imaging on or off.

The function to hide highest/lowest temperature column 
at the screen bottom

under the operation after normal start up, press “            ” key and 
the screen bottom will display highest/lowest temperature column. 
Press “           ” can also hide it. 

LCD screen display

After turning on the power, open the lens protection cover, as 
shown in         , the screen shows the thermal imaging status.

Witching between infrared thermal image and visible image

press  “        ” or “       ” key to switch the degree of fusion between 
inferred thermal images and visible images (the degree of fusion is 
0%, 25%, 50%, 75% and 100%).

Note:
Time adjustment may be required when you move the camera 
between environments with widely varying ambient temperatures.

Image capture

press the image capture key. When the capture is successful, the 
screen will display “store photo?” prompt. If “yes” is selected, 
please press “          ” key to determine to save the image. If “no” is 
selected, press “            ” key to determine not to save the image.

Image output

The saved images through capture may be checked and output 
by connecting with a computer through Micro USB.

Read images

Open the USB protective cover as shown in        . Use USB line to 
connect the USB port and then computer to read the images or 
save it into computers.images or save it into computers.

The supported operating system through verification includes: 
winxp, win7, win 8, win10, Apple system.

It is suggested to use the attached USB line or USB line with 
higher quality.

Note:
When connecting with a computer, pull off the data line after 
selecting “pop out device safely” to avoid causing file system 
damage and other problems. If “unable to save” and other 
problems occur, you may find the hard disc in the computer and 
fix it.

MENU

SELECT

 2

 3

17

18

Содержание HT-18


















Отзывы: