Upgrade Firmware
15
6. Upgrade Firmware
Version number and support files list:
Note:
When the phone which version is 1.0.3.71 or older upgrade to 1.0.3.73, phone will upgrade img_9xx.bin
then automatically upgrade fw9xx.rom. fw9xx.rom is all-in-one firmware file. After upgrade to the 1.0.3.73
firmware, in the next time, phone will only need upgrade one file fw9xx.rom.
6.1 Configuring HTTP Server
Htek IP Phone supports using FTP, TFTP, HTTP and HTTPS protocols to obtain the address of provision
server. Default way is HTTP. For how to configure a HTTP server, as follows:
You can download a free HTTP server from
http://httpd.apache.org/
or use Microsoft IIS web server. Then
setup HTTP server.
For more information on how to configure TFTP,FTP and HTTPS servers, please refer to
Upgrade
through TFTP
in page 63,
Upgrade through FTP
in page 66 and
Upgrade through HTTPS
in page 67.
6.2 How to Configuring HTTP Server
Login webpage, Management”-> “auto provision” ->” Firmware Upgrade”-> “Upgrade Mode” needs to be
set to HTTP. “Firmware Server Path” needs to be set to be a valid URL of a HTTP server, server name
can be in either FQDN or IP address format. Below are examples of some valid URLs.
e.g. firmware.mycompany.com:5688/Htek
e.g. www.mycompany.com:5688/fm/Htek
e.g. 218.2.83.110
Below are Instructions for FW upgrade via HTTP:
(1) You can download a free HTTP server from http://httpd.apache.org/ or use Microsoft IIS web server.
Then setup HTTP server.
(2) Unzip the firmware file and put the files under the root/fm directory of the HTTP server.
(3) Visiti
ng “HTTP:\\192.168.0.254\fm\fw924.rom on localhost by browser” to verify the HTTP Server. If
visiting “HTTP: \\192.168.0.254\fm\fw924.rom on another computer is no prompt to download fw924.rom
file, please check the firewall (Suggest to close the firewall).
1.0.3.58-1.0.3.72
1.0.3.73 or later
boot_9xx.bin
img_9xx.bin
hlpres.tar
Language.tar
ring4.bin
ring5.bin
ring6.bin
ring7.bin
ring8.bin
fw9xx.rom