HTD HD-IWS10 Скачать руководство пользователя страница 2

2

Safety Instructions for the SDA-120 Digital Amplifier

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle,

 is intended to alert the 

user to the presence to un-insulated dangerous voltage within the product’s enclosure that may be of 

sufficient magnitude to constitute a risk of electrical shock to persons.

The exclamation point within an equilateral triangle

 is intended to alert the user to the presence 

of important operating and maintenance (servicing) instructions in the literature accompanying this 

appliance.

Read Instructions

All safety and operating instructions should be read before the 

appliance is operated.

Retain Instructions

The safety and operating instructions should be adhered to.

Heed Warnings

All warnings on the appliance and in the operating instructions 

should be adhered to.

Follow Instructions

All operating and use instructions should be followed.

Water and Moisture

The appliance should not be used near water.  For example, 

near a bathtub, washbowl, kitchen sink, laundry tub, in a wet 

basement, or near a swimming pool, etc.

Ventilation

The appliance should be situated so that its location or position 

does not interfere with its proper ventilation.  For example, the 

appliance should not be situated on a bed, sofa, rug, or similar 

surface that may block the ventilation openings: or placed in 

a built-in situation, such as a bookcase or cabinet that may 

impede the flow of air through the ventilation openings.

Heat

The appliance should be situated away from heat sources such 

as radiators, heat registers, stoves,  or other appliances (includ-

ing amplifiers) that produce heat.

Power Sources

The appliance should be connected to a power supply only of 

the type described in the operating instructions or as marked on 

the appliance.

Grounding or Polarization

Precautions should be taken so that the grounding or polariza

-

tion means of an appliance is not defeated.

Power Cord Protection

Power supply cords should be routed so that they are not likely 

to be walked on or pinched by items placed on or against them, 

paying particular attention to cords at plugs, convenience re-

ceptacles, and the point where they exit from the appliance.

Cleaning

The appliance should be cleaned only as recommended by the 

manufacturer.

Power Lines

An outdoor antenna should be located away from power lines.

Non-Use Periods

The power cord of the appliance should be unplugged from the 

outlet when left unused for long periods of time.

Object and Liquid Entry

Care should be taken so that objects do not fall and liquids are 

not spilled into the enclosure through openings.

Damage Requiring Service

The appliance should be serviced by qualified personnel when: 

a) the power supply cord or the plug has been damaged: b) 

objects have fallen, or liquid spilled into the appliance: c) the 

appliance has been exposed to rain: d) the appliance does 

not appear to operate normally or exhibits a marked change 

in performance or e) the appliance has been dropped, or the 

enclosure damaged.

Servicing

The user should not attempt to service the appliance beyond 

that described in the operating instructions. All other servicing 

should be referred to qualified service personnel.

Product Servicing

If your system fails to operate properly, please contact HTD 

directly for further assistance, at 1-866-483-2834.

Additional information, including detailed specifications for each

model, can be found on our website, 

www.htd.com

. Thanks 

again for choosing Home Theater Direct!

If you have any questions, we can be reached at...

[email protected] or toll free 1-866-HTD-AUDIO (483-2834)

Warning

 - To reduce the risk  of fire or shock, do not expose this appliance to rain or moisture.

Caution

 

- To reduce the risk of fire or shock, do not remove the cover or back.  No user serviceable parts inside.

 

 

Refer servicing to qualified service personnel.

Caution 

 - To prevent electric shock,  match wide blade of plug to wide slot, fully insert.

Содержание HD-IWS10













Отзывы: