1000 Shiloh Rd, Suite 100
Plano, Texas 75074
Toll free: 866-HTD-AUDIO (483-2834)
www.htd.com
It is not necessary to place any material
between the Speaker Plate and the
back of the speaker. Careful and proper
installation and removal should cause no
damage to the finish on the back of the
speaker. A secure fit will also prevent any
rattling or buzzing while the speaker is in
operation. Never over-tighten the Speaker
Plate to the back of the speaker, especially
when using a power screwdriver, as it
is possible to strip the bolts inside the
cabinet.
The speaker can be mounted to the
speaker plate vertically or horizontally.
The Speaker Plate can be rotated 360
o
and tilt 15
o
in any direction. The plate-arm
can pan 180
o
. This provides a myriad of
possible speaker positions. Take some
time to determine the best position to
connect the Speaker Plate to the speaker
based on the primary direction you need
the speaker to face.
Two Mounting/Assembly Options:
Option 1:
Using a 3mm allen wrench (not included), loosen the smaller of the two allen screws (the one closest to the speaker plate)
on the top part of the bracket. Make sure you do NOT unscrew the screw completely (as it can be difficult to re-insert the
screw). Once the screw is loosened sufficiently the speaker plate will separate from the wall plate. Thus allowing the speaker
to be attached to the speaker plate. Once speaker is attached to the speaker plate (AND the wall plate has been securely
mounted to the wall), the plate (with the speaker attached) can be easily re-attached to the wall plate. Feed the speaker
cable through the speaker cable channel located on the bracket base and connect the speaker cable to the speaker cable
terminals on the speaker.
It is important to periodically check to ensure all screws and bolts are securely fastened.
Option 2:
Securely, mount the BR-TPR to the wall without the speaker attached to the speaker plate. You can then mount the speaker
to the speaker plate. Once speaker is mounted to the speaker plate, feed the speaker cable through the speaker cable
channel located on the bracket base and connect the speaker cable to the speaker cable terminals on the speaker.
It is
important to periodically check to ensure all screws and bolts are securely fastened.
Use included allen
wrench to tighten the
bracket arm
The BR-TPR has vary-
ing points and degrees of
movement for optimum
flexibility in speaker
placement and audio
direction
