Connect headset to computer through inter-
face box. Short cables connect to PC, long
3 in1 cable connects to headset. See 17 & 18.
Refer to forum for min PC specs.
Plug USB, power and the
DARK BLUE
end of HDMI
cable into top of headset. (HDMI is one way)
Left two ports remain free (Audio & USB)
Thread cables through loop on top of strap.
Interface box is directional. ‘PC’ side connects
to short computer cables, ‘VR’ side connects to
black ends of headset 3 in 1 cable.
Turn power switch ON. LED will light up.
Use outside knob to adjust distance between
lenses. This accomodates narrow or wide set
eyes. Start in the middle if unsure.
Remove lens film, see appendix for care.
Space for eyewear can be created by extending
face gasket out and re-tightening inside knob.
Having lenses closer to your eye results in bet-
ter field of view.
18
16
17
19
20
