•
There are still two Phillips screws (#00) remaining
that secure the rear portion of the phone’s case,
locate and remove these screws with the
appropriate screwdriver.
•
The rear portion of the phone’s case has clips
around the entire perimeter of the phone. Use the
plastic opening tool to release these clips and
remove the rear portion from the Thunderbolt 4G.
Step 9 – Speaker Assembly
•
The speaker assembly is secured to the rear
portion of the phone’s case with a small amount of
adhesive. Use the spudger to gently pry the
speaker assembly out of its housing in the rear
portion of the case.
Step 7
Step 8
Page 4 of
9
HTC Thunderbolt 4G–Disassemble Guide