HTC GL 270 HD, Руководство пользователя

Страница: 24 / 42

Operation HTC GL 270 HD
16 2.0
4.4.2 Changing grinding tools
1. Remove the grinding tool by giving it a few light taps with a hammer so the locking
mechanism releases, see Figure 4-4, page
16 . Then draw the tool up out of the
guide slot.
Figure 4-4. Removing grinding tools
2. Slide the new grinding tool diagonally, from above, down into the appropriate guide
slot on the tool holder, see Figure 4-2, page
15 . Then push the tool fully into the
guide slot.
3. Lock the grinding tool into the tool holder by giving it a few light taps with a
hammer, see Figure 4-3, page
15 .