HTC 650 HDX, Руководство пользователя

Страница: 21 / 40

HTC 650 HDX Operation
3.0 15
3. Make sure that the handle lock returns to the original position to guarantee that the
handle is locked properly.
Figure 4-2. The handle's position
1. Working position - the working
height can be adjusted to two positions
using the machine's adjustable handle.
2. Rear position - used for tipping the
machine to make tool replacement
easier.
3. Forward position - used during
transport, as the machine takes up
significantly less space.
4.3 Handling weights
The machine is equipped with two weights to make it easy to move the machine's centre
of gravity. Each weight is provided with two locking pins with which the weights can be
lowered and locked in three positions; forward, up (normal position) and backwards.
• Pull each pin out and lock in the extracted position by turning in the direction of
the arrow, see Figure 4-3, page
16 .
Warning!
There is a risk of crush injuries when the weights are folded back, since these
are not locked in this position.
Tip!
We recommend that the weights are folded up during grinding, since if the
grinding pressure is too high and the tool is wrong, it can cause damage to the
machine and the floor.