P60:REAL TIME CLOCK
P50 PRESSURE COMPENSATION
When entering setup mode, P50 and
“PrES” (Fig.29) are displayed on the LCD.
Press to set pressure compensation
value for CO2 measurement.
The current set will flash on LCD
(Fig.30).The barometric pressure unit
is kpa.
Press or to adjust the pressure
value and press to confirm.
N
X
M /AVG
HOLD
MEM
N
X
M /AVG
Fig.29
Press to escape and return to P50.
START
ESC
Fig.31
Fig.32
Fig.30
Go into P60 for setting the real time
clock of this meter.
Press and it goes into P61to set
the time format as 12hour or 24 hour.
The current set will flash on LCD. Press
or to change the format and
press to confirm and entering real
time clock setting.(Fig.31)
The blinking Year digits on the lower
display. To change the digit, press
or to adjust. Press to confirm
and enter Month setting. Repeat above
steps to complete the month/date/hour/
minute/second setting.(Fig.32)
N
X
M /AVG
HOLD
MEM
N
X
M /AVG
N
X
M /AVG
CO
2
CO
2
HOLD
MEM
PM
14
