HT THT100, Руководство пользователя

Страница: 24 / 52

THT100 - THT200 - THT300 - THT400
EN - 23
Section Image Align
In this section it is possible to align the IR image to the visible one shown on the display.
These images could not be aligned due to the different position of the IR sensor and of the
internal photo camera on the instrument.
Fig. 27: Alignment of the image on the display
1.
Touch the item “Image Align”. Fig. 27 – middle is shown on the display. In this figure,
the two images with a low infrared value are overlapping.
2. Touch the 4 arrows on the display in order to move the IR image by overlapping it onto
the visible one (see Fig. 27
– right side).
3.
Touch the icon “ ” to confirm or icon “X” to quit without changes.
5.3.1.3
Menu “Reset”
In this section, it is possible to delete the content of the internal memory or of the inserted
micro SD card and restore the instrument's default conditions. Touch the screen to
activate/deactivate the desired options.
Fig. 28: Instrument reset menu
1.
Touch the item “Reset”. The screen in Fig. 28 – right side appears on the display.
Touch the item “Delete memory”. The following confirmation screen is displayed: