background image

“SMART Plus”

 

 

 

Rev.3 agosto 2020 

Electronic control for towel radiators

 

 

SMART Plus 

is an electronic thermostat for the automatic control of electric 

towel radiators. By means of an external sensor it is capable of keeping the 
ambient temperature to a desired value.

 

Ten different electric resistances are available in a range between 100W and 
1000W.

 

 

Operative modes: Comfort, Boost, Standby/Antifreeze, Timer12 
and Timer24.

 

 

• “Comfort” mode: 

The thermostat keeps the room 

temperature at the value set by the user. 

 

• 

“Boost” mode

: In “Boost” mode the heating element is 

activated for a period of 2 hours independently of the 
configured temperature. The temperature is however 
automatically controlled in order not to exceed 29°C. At the 
end of the 2 hours period, the device returns to “Comfort” 
mode.

 

 

• 

“Timer”mode: 

The control system enters into “Boost” mode 

for 2 hours; after that it returns into “Comfort” mode for 22 or 
10 hours (period configurable by the user) and then it enters 
again into “Boost” mode for 2 hours. This sequence is 
repeated endlessly.

 

 
 
 
 
 

 

Available colors: - White(RAL 9003).

 

- Crome.

 

 

• 

“Stand-by” mode

: In this mode the device goes in  standby and the heating element is powered off.

 

 
 

SMART is a certified product: 

 

SMART is compliant with the following standards:

 

-Eco-design Directive for Energy-using Products, 2005/32/EC (<0,5W).

 

-EN 60335-1:2012 -EN 60335-2-30:2011 -EN 60335-2-43:2005

 

-EN 61000-3-2:2004 -EN61000-3-3:1995 -EN 50366:2003

 

-EN 55014-1:2008 -EN 55014-2:1998

 

 

 

 

 

 

Содержание SMART Plus









Отзывы: